cerabone® - 100% Pure bone mineral

cerabone®

100% Pure bone mineral
cerabone® is a bovine bone mineral of exceptional purity and high crystallinity – as opposed to non-sintered bone grafts, no remnants of water or calcium carbonate are found [1]. This results in excellent mechanical and biological stability as pure bone apatite is virtually insoluble - it is the reason for cerabone®’s ultimate volume stability. Permanent structural support of the augmented site will be provided.
  • Socket and ridge preservation
  • Furcation defects (class I-II)
  • Ridge augmentation
  • Peri-implant defects
  • Intraosseous defects (1-3 walls)
  • Sinus lift

Rehydration

Rehydration in blood from the defect site or saline solution is not necessary but facilitates handling and application since the wetted cerabone® granules stick together.

Particle compression

Avoid compressing the particles excessively during application; less packed particles leave space for blood vessel ingrowth and formation of new bone matrix.

Healing time

A healing time of at least 6 months is recommended before re-entry to ensure stable integration of the particles.

Mixing of material

Mixing of cerabone® with autologous bone bring about a biological activity (osteo-inductive and osteo-genetic properties of autologous bone) and supports faster regeneration and improved formation of new bone.

GBR and soft tissue augmentation with cerabone® and mucoderm® - H. Maghaireh & V. Ivancheva

Initial situation: missing teeth #11 & 12 and badly broken #21 root

botiss cerabone® & Jason® membrane for GBR - Clinical case by Prof. Dr. Dr. D. Rothamel

Instable bridge situation with abscess formation at tooth #15 after apicoectomy

botiss cerabone® & Jason® membrane for GBR - Clinical case by Dr. S. Kovalevsky

Implant insertion in atrophic alveolar ridge

Advanced vertical augmentation in posterior maxilla with maxgraft® bonering - Dr. A. Isser

Initial situation 57-year old female patient. X-ray scan reveals severe bone loss due to inflammation in region 13. Treatment plan was extraction of teeth 13 and 14 and augmentation after healing.

Socket preservation with cerabone® - Dr. P. Kämmerer

Extraction socket grafted with cerabone.

Socket preservation using cerbaone® and permamem® - Dr. A. Caiazzo

Grafting of the extraction socket with small cerabone® granules.

GBR with Jason membrane® and cerabone® - D. Fontana

Lateral view of the defect in the posterior right maxilla.

Sinus lift one-stage with cerabone® and collprotect® membrane - Dr. V. Kalenchuk

Clinical situation of the edentulous distal maxilla before the surgery

botiss cerabone for ridge splitting and augmentation of an atrophic alveolar ridge - Clinical case by Dr. V. Moshirabadi

Situation before augmentation, atrophic alveolar ridge

Intrabony defect treated using collprotect® membrane & cerabone® (1) - Cosgarea & Sculean

Pre-surgical probing reveals a deep intrabony defect on the distal aspect of the upper canine.

botiss cerabone® & Jason® membrane for block augmentation with autologous bone blocks - clinical case by Dr. S. Stavar

Initial clinical situation with single tooth gap in regio 21

botiss cerabone® & collagen fleece for immediate implantation - Clinical case by Dr. D. Jelušić

Clinical situation before extraction and implantation

botiss cerabone® & Jason® membrane for GBR - clinical case by Dr. S. Stavar

Initial clinical situation with broken bridge abutment in regio 12 and tooth 21 not worth preserving

Restoration of all four incisors with two maxgraft® bonering - Dr. B Giesenhagen

Initial situation pre-op: Central incisors with mobility 3

Block augmentation with maxgraft® in the maxilla - Dr. R. Cutts

Initial situation: 40 year old female patient with extensive scar tissue after several surgeries restored with a Rochette bridge

Ridge augmentation with maxgraft® bonebuilder and sinus floor elevation – Dr. K.P. Schiechl

Initial clinical situation: Bone defect in the upper right maxilla (teeth #14-16)

Horizontal ridge augmentation with maxgraft® cortico - M.Sc. E. Kapogianni

OPG of the initial situation – provision of missing denture in regio 44 to 47 by a resin-retained bridge

Regenerative corticotomy to compensate lower incisor malocclusion with cerabone® and mucoderm®

Initial view of the clinical case: Class III malocclusion
Treatment plan: Regenerative corticotomy (PAOO)

Socket preservation with cerabone® - Dr. Rahib Adi Nader

Situation before extraction with single tooth crowns on 21 and 22

Immediate implant placement and correction of horizontal and vertical bone loss using an allograft bone ring, cerabone® and Jason® membrane - Drs. Miller and Korn

The patient presented with pathologic mobility of upper left central incisor. Radiographic examination revealed significant circumferential attachment loss with an unfavorable crown to root ratio.

Block grafting in the aesthetic zone with maxgraft®, Jason® membrane and cerabone® - Dres. H. Maghaireh and V. Ivancheva

Initial situation – Treatment plan: Replace the adhesive upper left central incisor bridge with a dental implant

Bone augmentation in the aesthetic zone with maxgraft® bonering – Dr. R. Cutts

Initial presentation of failing post retained crown with previous history of failed apicectomies and amalgam tattooing and scar tissue

cerabone® and mucoderm® for immediacy in esthetic zone -Dr. M Motta

Initial view of the case. Discoloration of 1.1 and mild class I gingival recession

GBR with cerabone® and Jason® membrane in the front tooth region - Dr. H. Maghaireh

Initial clinical situation with gum recession and labial bone loss eight weeks following tooth extraction

botiss cerabone® & Jason® membrane for horizontal augmentation - Clinical case by Dr. M. Steigmann

Three implants placed in a narrow posterior mandible

botiss cerabone® & collprotect® membrane for GBR - Clinical case by Dr. V. Kalenchuk

Clinical situation with narrow alveolar ridge in the lower jaw

Sinus Floor Elevation with maxgraft® bonering and subcrestal implantation in an eggshell thin sinus - Dr. K. Chmielewski

Initial situation: X-ray scan reveals eggshell thin sinus floor (1-3 mm) on both sites of the maxilla; green areas indicate the planned maxgraft® bonerings and red areas the planned implants

Immediate implant placement using cerabone® and collagen fleece - Dr. D. Jelušić

Pre-operative situation showing tooth 21 with deep periodontal pocket. Tooth presented with mobility grade III.

botiss-cerabone-permamem-maxgraft-mucoderm-horizontal-gbr-maghaireh

Initial situation - A young female 34 years old lost her front teeth in an surfing accident and she had a 5 unit bridge supported by her upper left lateral and right canine. The restoration failed and both supporting crowns have exposed and leaking margins.

Regeneration of a 9 mm vertical bone defect with cerabone®, autologous bone and S-PRF –  Dr. A. Eslava

Initial x-ray showing bone loss around implants placed 5 years ago in another dental clinic

• 100% Pure bone mineral
• Human-like bone structure
• Rough, hydrophilic surface
• Ultimate volume stability
• Easy handling
• Sterile

cerabone® Granules

Article Number

Particle Size

Content

1510

0.5 to 1.0 mm

1 x 0.5 ml

1511

0.5 to 1.0 mm

1 x 1.0 ml

1512

0.5 to 1.0 mm

1 x 2.0 ml

1515

0.5 to 1.0 mm

1 x 5.0 ml

1520

1.0 to 2.0 mm

1 x 0.5 ml

1521

1.0 to 2.0 mm

1 x 1.0 ml

1522

1.0 to 2.0 mm

1 x 2.0 ml

1525

1.0 to 2.0 mm

1 x 5.0 ml

cerabone® Block

Article Number

Dimensions

Content

1720

20 x 20 x 10 mm

1 x Block

Immediate implantation and augmentation by Dr. Derk Siebers
Immediate implantation and augmentation by Dr. Derk Siebers
Lateral sinus lift one-stage by Dr. Derk Siebers
Lateral sinus lift one-stage by Dr. Derk Siebers
Immediate implantation by Dr. Derk Siebers
Immediate implantation by Dr. Derk Siebers
Lateral one-stage sinus lift with cerabone® and Jason® membrane – Dr. Massimo Frosecchi (Italy)
Lateral one-stage sinus lift with cerabone® and Jason® membrane – Dr. Massimo Frosecchi (Italy)
Lateral sinus lift one-stage by Dr. Derk Siebers
Lateral sinus lift one-stage by Dr. Derk Siebers
Socket seal on pig jaw by PD Dr. Dr. D. Rothamel
Socket seal on pig jaw by PD Dr. Dr. D. Rothamel
Augmentation of dehiscence defect by Dr. Marius Steigmann
Augmentation of dehiscence defect by Dr. Marius Steigmann
Immediate tissue augmentation technique with application of cerabone® and Jason® membrane
Immediate tissue augmentation technique with application of cerabone® and Jason® membrane
Ridge preservation by Dr. Derk Siebers
Ridge preservation by Dr. Derk Siebers
Lateral augmentation on pig jaw by PD Dr. Dr. D. Rothamel
Lateral augmentation on pig jaw by PD Dr. Dr. D. Rothamel
GBR with cerabone® and Jason® membrane – Dr. Alfonso Caiazzo (Italy)
GBR with cerabone® and Jason® membrane – Dr. Alfonso Caiazzo (Italy)
cerabone® - natural bovine bone grafting material
cerabone® - Superior hydrophilicity

The long-term success of cerabone® is based on its excellent osteoconductive properties and exceptional purity achieved by a unique 1200°C temperature treatment processing. The unique topographic and physico-chemical characteristics of cerabone® efficiently support blood clot formation and the proliferation of regenerative cells leading to predictable particle integration. Its non-resorbability, owing to its exceptional purity, provides stability of the augmented site on a long-term basis.

[1] Tadic, D. and Epple, M. Biomaterials 2004; Vol. 25 No. 6, pp. 987–994